Bipul biswas Avatar

Bipul biswas

Your Job Title

You haven't added a professional summary yet. Give the ASME community a chance to learn about you and your interests outside of your resume.

experience

Dept. Manager.  
Componental Automation., March 2012 to Present, kolkata India
(Quality (Engineering & Industrial Management))
Working as Dept. Manager & is responsible for all QA\QC, Inspection activities on Shop floor.

lecturer  
MSIT (Techno India) Kolkata., September 2010 to February 2011, kolkata India
(Educators)
taught fluid mechanics, manufacturing technology, power plant engg., thermal engg., stacs & dynamics, heat transfer, fluid mechanics.

lecturer  
Bengal College of Engineering and Technology, September 2009 to August 2010, durgapur India
(Educators)
taught fluid mechanics, manufacturing technology, power plant engg., thermal engg., stacs & dynamics, heat transfer, fluid mechanics.

surveyor  
Bureau Veritas (BV), January 2007 to August 2009, kolkata India
(Quality (Engineering & Industrial Management))
Worked as Inspector & is responsible for third party inspection of bought out and fabricated engineering items (Pipe Fittings,Fans, Pumps, Impellers,Vibroscreens) Worked as a TPI for inspection of Structural ( Fit up, Fabrication and Irection ) works for the construction of integrated steel and power plant of Bhushan Power & Steel Ltd. as per approved QAP/ITP at Jharsuguda, Orissa. Worked as a TPI for inspection of bare (Longitudinal-SAW and Helical-SAW) Line Pipes at vendor’s work [MAN Industries (I) Ltd.] as per specification API 5L and as per GSPL approved QAP. Inspection of Underground Piping and LPG Piping as per specification. Audit (Structural) activities for Tata Motors Ltd. and different Buildings/Shop. Project 1 : MMPP(Morbi Mundra Pipe Line Project) on behalf of GSPL. Project 2 : MHSRP-II (ONGC Project) on behalf of L&T at Jindal Saw Ltd., Mundra. Project 3 : Construction of integrated Power and Steel plant of Bhushan Power & Steel Ltd

Surveyor  
Det Norske Veritas As (DNV), June 2006 to December 2006, kolkata India
(Quality (Engineering & Industrial Management))
Worked as a TPI for inspection of bare (Longitudinal-SAW and Helical-SAW) Line Pipes at vendor’s work [MAN Industries (I) Ltd.] as per specification API 5L and as per GAIL/Tractebel approved QAP. Inspection of coated (Longitudinal-SAW and Helical-SAW) Line Pipes at vendor’s work [MAN Industries (I) Ltd.] as per specification DIN 30670, ISO 15741, and as per GAIL/Tractebel approved ITP. Inspection and monitoring of all quality related activities on Shop Floor. Witness of all Tests (On line and Off line) carried out as per specification, QAP and ITP. Reviewing of all Data Sheets and Records. Reviewing of all Material Test Certificates. Approval of WPS/PQR/WPQ as per ASME Sec.IX. Reviewing of Radiographic Film with acceptance standards API 5L. Preparing of Daily Production Report. Worked as Inspector & is responsible for third party inspection of bought out and fabricated engineering items. Project 1 DUPL(Dahej Uran Pipe Line Project,138.1 KM) for GAIL(Gas Authority India Ltd.) on behalf of MAN Industry. Project 2 SCOT(Sirian Company of Oil Transport Project,11KM) on behalf of MAN Inds. Project 3 SCOP(Trans-Iraq Gas Network Project,150 KM Line Pipes for Ministry of Oil. Inspection of Pipe Bend by destructive as well as non-destructive (UT/RT/MPT) means as per specification API 5L and as per GAIL/Tractebel approved ITP/QAP at PSL (Gujrat).

Inspection Engineer  
Development Inspection Services, April 2005 to May 2006, kolkata India
(Quality (Engineering & Industrial Management))
Worked as Inspector & was responsible for third party inspection of bought out engineering items (such as Fasteners, Plates, Angles, TMT Bars etc.) at vendor’s work (SRMB Udyog Ltd. Shyam Steel India Ltd. etc.). Was responsible for third party inspection of fabricated engineering items (such as CableTrays,Galvanized engineering components, Drive Shaft, Valves, Gear Reducer, Pipe Supports, Pressure Gauges, Fan Assly.etc.).at vendor’s work (Paharpur Cooling Towers Ltd., H.Sarkar & Co.,A.N.Instruments etc.) on behalf of different reputed clients (Toyo Engg. India Ltd., THERMAX India Ltd. etc.). Inspection of Welded items like Boiler Shell, Harps by destructive as well as non- destructive (UT/RT/LPT) means at vendor’s work (Alstom Projects India Ltd.).on Behalf of Toyo Engineering India Ltd. Inspection of Electrical Items like Motors, Bus duct etc at (Areva T&D Ltd., Alstom India Ltd. Etc.) on behalf of THERMAX India Ltd. Etc. Co-ordination of inspection activities for Project items with different client & vendor.

Asst. Engineer (QC)  
Jupiter (India) Enterprises, July 2003 to March 2005, kolkata India
(Quality (Engineering & Industrial Management))
Worked as Asst. Engineer (QC) and was responsible for Quality Control during manufacture of Drilling Pipes and Core Drilling Accessories for Mining Industries (Geological Survey of India, Calcutta Public Health Etc. as per QAP approved by Manager (QC). Was responsible for Quality Control during manufacture of Mechanical Spares Manufactured by the Company for different Clients.

education

NITTTR kolkata  
Master's Degree, manufacturing engg., Jan, 2010 to Jan, 2015
good in studies

Jadavpur University  
Bachelor of Engineering, Production Engineering, Jun, 1999 to May, 2003
first class.

projects

One month Training at Orient Fans, Kolkata.  One month Training at Durga  by  bipul biswas    
June, 2002 - Present
excellent

Certifications

  • ASNT Level II in Radiographic Testing  Ultrasonic Testing