“Development of Viscometer According to Newton’s Law of Viscosity”
May, 2013 -
“Development of Viscometer According to Newton’s Law of Viscosity” as final year project in B.E. Mechanical Engineering.
“Analysis of Mechanical Screw Jack”
May, 2011 -
“Analysis of Mechanical Screw Jack” for MASKO Engineering Corporation, Rajkot as External Project after completion of Diploma in Mechanical Engineering.
“Maintenance of Experimental Air Conditioner Window type”
January, 2011 -
“Maintenance of Experimental Air Conditioner Window type” as major Project in final year of Diploma Mechanical Engineering.
"Process Planning of Mechanical Screw Jack"
June, 2010 -
"Process Planning of Mechanical Screw Jack" for MASKO Engineering Corporation, Rajkot as minor Project in Diploma Mechanical Engineering
“Design of viscometer according to Newton’s Law of Viscosity”
Published by (ICMEETS-2014 ISBN No. 978-93-83083-45-9, Maulana Azad National Institute of Technology, Bhopal)
Authors: Dr. Mukesh Bulsara, Harsheel Panchasara, Anuj Shishu and Namarata Italiaya. Published January 29, 2014
In automobile, a lot of energy generated by the engine is lost in the form of heat. Also a lot of wear and tear occurs in the engine due to friction in mating parts. To avoid this lubricant oil is pumped into the system. The function of a lubricant is to reduce the wear and tear and remove the foreign particles from the engine. Viscosity of the oil plays an important role in achieving these functions. Any significant change of an oil viscosity, reduction or increment may damage lubrication film stability and effectiveness, resulting in shorter oil and component lifespan and higher oil consumption decreasing engine performance and reliability. Viscometer is an instrument to measure the viscosity of a fluid at a specific temperature.The parameters used by existing viscometers to calculate the viscosity of the oil complies with the newton’s law of viscosity to a limited extent. The newly developed improved viscometer checks the viscosity of the oil used in automobile engine, by considering the factors directly affecting the viscosity of the oil as stipulated in the Newton’s law of viscosity. An improved design of Viscometer which works on the Newton’s law of viscosity and actually measures the Force F, the Area A, the velocity gradient du/dy and then determines the viscosity µ.
“Design and Finite Element Analysis of Mechanical Screw Jack”
Published by (ICMEETS-2014, ISBN No. 978-93-83083-45-9,Maulana Azad National Institute of Technology, Bhopal.)
Authors: Prof. F.R.Malek and Harsheel Panchasara. Published January 29, 2014
The paper’s purpose is to analysis the stresses and strains state in the structure of a mechanical screw jack, and it
is subjected to the loading under static conditions, when the screw jack is at rest on the floor and lifting the
weight. The analysis of the stresses and strains state of the structure of a mechanical screw jack for increasing its
solidity in exploitation is made using the calculation software with finite elements Pro-Mechanical. The research
performed allows the evaluation of the stresses state, pointing out the critical areas and measures which are
imposed in order to increase the solidity and bearing capacity of the structure for the mechanical screw jack. The
results we have obtained allowed us to make up a study about the dimension optimization of the structure in
order to design the mechanical screw jack. Thus, the material use could be reduced without exceeding the limits
of the most appropriate resistance.
“Design Optimization of Mechanical Screw Jack"
Published by (International Journal of Futuristic Trends in Engg. and Technology, ISSN: 2348-5264, Vol. 1(06),2014)
Authors: Prof. F.R.Malek and Harsheel Panchasara. Published July 30, 2014
The paper consists of shape optimization analysis of
mechanical screw jack with the lifting capacity of 4 KN, total lifting
height of 235mm and span is 75mm, and it is subjected to the
loading under static conditions, when the screw jack is at rest on the
floor and lifting the weight. Mechanical screw jack is very widely
used in high volume applications such as car jack, floor jack or
garage jack which lifts vehicles so that maintenance can be
performed. Mechanical screw jack must be strong enough to lift the
weight of carrying load and also somewhat flexible in order to
sustain the shock and tension caused by lifting the load. So that one
of the most important steps in redesign of mechanical screw jack is a
stress analysis and optimization.
In order to get higher productivity in manufacturing industries,
applications of optimization techniques in metal cutting processes is
most beneficial for a production unit to produce quality product in
the market. The efforts required in achieving the desired output can
be effectively and economically be decreased by the implementation
of better designs. It is essential to determine stresses in local areas
and other areas using three dimensional, symmetric and
axisymmetric models, the preliminary conclusion is that finite
element analysis is an extremely powerful tool for design and
optimization of mechanical screw jack.
In this study the optimization is accomplished by finite element and
optimization study package Pro-Mechanica. The research performed
allows the evaluation of the stresses state, pointing out the critical
areas and measures which are imposed in order to increase the
toughness of the power structure for the mechanical screw jack. The
result obtained allowed us to make up a study about the dimension
optimization of the structure in order to redesign the mechanical
screw jack. Thus, the material, man and machine resources used
could be reduced without more than the limits of the most suitable
conflicts. The actual condition effect on jack was evaluated by
response optimization study. It is observed that for optimal results,
5% of mass reduction of the mechanical screw jack was obtained.
Best Engineering Student SAM-UTH Global Award 2014
Winner Best Engineering Student SAM-UTH Global Award Grade by SAM Global Foundation on 23rd March 2014 at VIT University, Vellore.
Best Student Award ISTE 2013
Best Student Award (Gujarat Section 2013) Indian Society of Technical Education (ISTE) .
ISTE was founded in the year 1967 with a mission to advance for the cause of education in general and all its function which pertain to engineering and allied branches of engineering and technology, architecture and town planning, pharmacy, management, process of teaching and learning, research, extension services and public relations in particular.
BEST ASME NEW STUDENT SECTION Award 2013
GCET ASME Student Section won BEST NEW STUDENT SECTION Award at ASME INDIA SPDC 2013 held at K.L. University, Vijayawada under my leadership as chairperson.
Runner-up in OGOP 2014
Runner-up in ASME ASIA-PACIFIC Zone for Old Guard Oral Presentation(OGOP) at ASME SPDC ASIA-PACIFIC 2014 at BITS Pilani, INDIA.
| Manufacturing & Processing
| Rocket Engines
| College (Students)
| Human Dynamics and Rehabilitation